Insert Bearings Spherical OD
National Precision offers a variety of insert bearings that can be used in numerous applications. Bearing inserts are used to replace worn or damaged bearings in an existing bearing housing without needing to repurchase a new mounted housing. In some cases, the mounted unit does not need to be removed from mounted surface. Insert bearings are designed to be mounted on shafts without using lock nuts, adapters, or shoulders. The inner ring of the insert bearing frequently extends outside of both sides of the housing to provide extra support to the shaft. Typically, these bearings come pre-lubricated with a multi-purpose lithium based grease, and allow for re-lubrication. Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.
- AMI UG206-20 Insert Bearings Spherical OD
- 20.00 mm
- 100.000 mm
- AMI UG206-19 Insert Bearings Spherical OD
- 0.071 kg
- 39.6 kN
- AMI UG206 Insert Bearings Spherical OD
- 62.89 mm
- 125.425 mm
- AMI UG205-16 Insert Bearings Spherical OD
- 2
- 16300 kN
- AMI UG205-15 Insert Bearings Spherical OD
- 45.000 mm
- 4500 rpm
- NTN A-UC215-215D1 Insert Bearings Spherical OD
- 3000 rpm
- 4800 rpm
- 65 mm x 120 mm x 68.3 mm SKF YAR 213-2F Insert Bearings Spherical OD
- 4 x 7/8-9 UNC
- EPR 21
- 25 mm x 52 mm x 34.1 mm SKF YAR 205-2F Insert Bearings Spherical OD
- 5000 rpm
- 40.000 mm
- 34.925 mm x 72 mm x 42.9 mm SKF YAR 207-106-2F Insert Bearings Spherical OD
- 22.225 mm
- 44.45 mm