Insert Bearings Spherical OD
National Precision offers a variety of insert bearings that can be used in numerous applications. Bearing inserts are used to replace worn or damaged bearings in an existing bearing housing without needing to repurchase a new mounted housing. In some cases, the mounted unit does not need to be removed from mounted surface. Insert bearings are designed to be mounted on shafts without using lock nuts, adapters, or shoulders. The inner ring of the insert bearing frequently extends outside of both sides of the housing to provide extra support to the shaft. Typically, these bearings come pre-lubricated with a multi-purpose lithium based grease, and allow for re-lubrication. Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.
- AMI UE206 Insert Bearings Spherical OD
- 23.00 mm
- 1.00 mm
- AMI UE204-12 Insert Bearings Spherical OD
- M 20x1
- HN 4
- AMI UE205 Insert Bearings Spherical OD
- 16000 rpm
- 4150 N
- AMI UE205-15 Insert Bearings Spherical OD
- 6700 rpm
- 27.00 mm
- AMI UE204 Insert Bearings Spherical OD
- 5 1/4 in
- 14 1/2 in
- AMI UG209 Insert Bearings Spherical OD
- 5 mm
- 1055
- AMI UG208 Insert Bearings Spherical OD
- EPR 15
- 36.3 kN
- AMI UG207-23 Insert Bearings Spherical OD
- 296 mm
- 43 mm
- AMI UG207-22 Insert Bearings Spherical OD
- 60.00 mm
- 3.00 mm
- AMI UG207-21 Insert Bearings Spherical OD
- 82.60 mm
- 215.0000 mm
- AMI UG207-20 Insert Bearings Spherical OD
- 12000 rpm
- 15000 rpm
- AMI UG207 Insert Bearings Spherical OD
- 35.000 mm
- 14.00 mm