NTN Bearing Driveshaft do Brasil

Tapered Roller Bearing Assemblies

Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

TIMKEN HM136948-90283 Tapered Roller Bearing Assemblies
-40 °C
1.52 kg
TIMKEN HM136948-90265 Tapered Roller Bearing Assemblies
5.41 Hz
5.05 kN
TIMKEN HM136948-90256 Tapered Roller Bearing Assemblies
8 Nm
105 mm
TIMKEN HM136948-90251 Tapered Roller Bearing Assemblies
30 mm
0.032
TIMKEN HM136948-90241 Tapered Roller Bearing Assemblies
90MM Bore; Straight
6.299 Inch | 160 Mil
Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Cam Follower and Track Roller - Stud Type
Cam Follower and Track Roller - Yoke Type
Cartridge Unit Bearings
Cylindrical Roller Bearings
Flange Block Bearings
Hanger Unit Bearings
Insert Bearings Cylindrical OD
Insert Bearings Spherical OD
Mounted Units & Inserts
Needle Non Thrust Roller Bearings
Tapered Roller Bearing Assemblies
6203rs Bearing
6005 2rs Bearing
6303 Bearing
6202z Bearing